Wired - Marantz PM700N Quick Start Manual

Wired

1 Connect a network cable
between your PM7000N and
your router.
(cable not included)
COAXIAL OPTICAL
DIGITAL AUDIO IN
PHONO
SIGNAL
GND
CD AUX RECORDER
AUDIO IN
4 Follow the instructions
and tap Next.
Marantz PM7000N
4
Select your network name.
(If your network name is not listed,
select "Rescan".)
Select Network
Network name
: :
enter back
ENTER BACK
4 Press the WPS button on
your router. Within 2 minutes,
press the ENTER button.
2 Power on.
3 Select language.
AC IN 4 Please wait while your PM7000N
RECORDER SUBWOOFER
O RK
N ET W
connects to your wired network.
AUDIO OUT PRE OUT
5 Please wait as completing the connection
can take a few minutes.
(The front panel of the PM7000N will show the status of
the connection.)
Marantz PM7000N
Sharing the network...
5
Enter your network
password using the
number keys on the
remote control.
＋10
5 Please wait as completing
the connection can take a
Quick Setup
few minutes.
Press the WPS button...
: :
connect back
ENTER BACK
(The front panel of the PM7000N will
show the status of the connection.)
Please wait as completing...
Quick Setup
Enter Wi-Fi Password
: :
character type １～９ a
Quick Setup
Connected!
Press the ENTER button.
Wi-Fi Connected
Access Point 1
:
next
ENTER
If the signal strength
of your wireless
Wi-Fi
network is weak, to
Connected! improve reception,
please turn the
antenna on the back
of your PM7000N or
move your router to
the PM7000N.
:
back
BACK
8