EuroLite DMX LED OPERATOR 6 User Manual page 16

1
FIXTURES buttons
To select and deselect devices. The control
LEDs indicate which devices are selected.
2
COLORS buttons
To select the color presets in manual mode.
3
COLOR FADE button
Activates the COLOR FADE mode (LED
lights), i.e. 7 preset colors (red, green, blue,
amber, pink, cyan, white) are faded.
4
COLOR MACRO button
Activates the COLOR MACRO mode (LED
lights); i.e. 7 preset colors (red, green, blue,
amber pink, cyan, white) can be selected with
the TIME fader.
5
AUTO button
Activates the AUTO mode (LED lights); i.e. 7
preset colors (red, green, blue, amber pink,
cyan, white) are switched in sequence. After
each sequence, the unit changes between
color switching and color fading.
6
CHASES button
Activates the CHASES mode (LED lights); i.e.
you can select 6 different chases with the
basic color buttons.
7
PRESET button
Saves the current scene (e.g. customized
color or program setting) into the internal
memory.
8
MANUAL RGBAWUV button
Activates the manual mode (LED lights); i.e.
you can select a constant lighting color with
the 6 basic color buttons or choose among
the 18 color presets with the buttons in the
COLORS section.
9
Basic color buttons
With these six buttons the six basic colors
red, green, blue, UV, white and amber can be
selected in manual mode. By pushing a
button the respective color lights at full
brightness. In CHASES mode the buttons
select 6 different preset chases.
10
Faders 1 – 6
Control the brightness of the six basic colors
(refer to upper printing) in manual mode. If a
program is running, the faders control the
respective parameters (refer to lower
printing).
11
SENSITIVITY fader
Adjusts the sensitivity of the sound control.
12
SOUND button
Activates the sound-controlled color change
via the internal microphone (LED lights).
Sound control can be used for the COLOR
FADE, AUTO and CHASES modes.
13
STROBE button
Activates the strobe function (LED lights). The
flash frequency can be adjusted with the
STROBE SPEED fader while pressing the
STROBE button.
14
BLACKOUT button
Turns off the connected fixtures (LED lights);
by pressing the button once again, all fixtures
will return to their previous brightness level.
15
Power on/off
Schaltet das Gerät ein und aus.
16
Power input
Plug in the mains cable of the supplied power
unit here.
17
DMX512 output
3-pin XLR jack for connecting the DMX input
of the first light effect unit.
16/20 00092701.DOCX, Version 1.0