D System Specifications; Chassis Physical Design - Dell Force10 E300 Installing And Maintaining

System Specifications
The major sections in this appendix are:
•

Chassis Physical Design

• Environmental Parameters on page 60
• Power Supplies System Power Requirements on page 60
• Module Power Requirements on page 61
• Agency Compliance on page 61
• Product Recycling and Disposal on page 63
Chassis Physical Design
Parameter
Height
Width
Depth (including cable management brackets)
Chassis weight with factory-installed components (backplane
and air filter)
Weight fully loaded (backplane, air filter, 1 fan tray, 2 SFMs,
2 RPMs, and 6 line cards
Mounting
Rack clearance required
Thermal output:
• Maximum for fully loaded chassis
• Normal operating conditions (25 deg.C, -48V-line)
• Minimum for chassis with one 24-port 1GE line card
Specifications
14 inches (35.6 cm)
17.4 inches (44.2 cm)
24 inches (61 cm)
90 pounds (approx.) (41 kg)
170 pounds (approx.) (77 kg)
Integral rack mount strips for front mounting in a standard
19-inch rack.
Optional brackets for center mounting in a standard 19-inch
and 23-inch rack or cabinet.
Optional brackets for front mounting in a 23-inch rack or
cabinet.
Front: 18-inches (46 cm)
Rear: 20-inches (51 cm)
2500 W (8500 BTU/hour)
2000 W (6800 BTU/hour)
800 W (2700 BTU/hour)
D
System Specifications | 59