Board Racks/ Swivel/ Quick Release
Hardware
x8
x4
x12
** BOARD RACK BUNGEE CORD NOT ILLUSTRATED FOR IMAGE CLARITY **
Below are the recommended mounting options for Roswell board racks.
A
Apply RED Loctite to 6 button head bolts and mount the backing
plate to a set of tines. Make sure the tines are properly seated in
the backing plate grooves. Torque bolts to 15 ft. lbs.
5/32"
x6
C
Apply red Loctite to 4 flat head bolts and mount the rack to the tower
Ensure the spacer is mounted between the rack and the tower.
Torque bolts to 15 ft lbs.
5/32"
x4
Wake/Surf Rack Assembly Instructions
Parts
Tines & Bungee x2
Backing Plate x2
Spacer x2
Installation instructions available with respective mounting products.
Fixed Tower Mount
Tools Required
5/32" Allen Key
Quick Release Swivel Mount
B
Place the spacer behind the backing plate, and mount following the
next step.
ww w.roswellmarine.com
22