Commissioning; Charging Time - Beckhoff CX1100-09 Series Hardware Documentation

5

Commissioning

5.1

Charging time

The charging time of the UPS module depends on actual the discharge and can not be measured exactly. It
is possible to estimate the "maximal charging time". This time describes the charging behavior of completely
discharged storage cells. The test units were discharged over night. Then the time to system start was
measured. The following table shows the results of the measurements.
Charging time
Model
CX1100-0900
CX1100-0910
CX1100-0920
CX1100-0930
The given times are average values. In operation the time for discharging must be added to
the time. In mode "No Abort" e.g. the storage cells will be discharged before the charging
starts.
Note
CX1100-09xx
Charging time
42 s
46 s
116 s
65 s
Version: 1.4
Commissioning
19