Advertisement
NOTE: A pump access MUST BE
PROVIDED for all whirlpool equipped units
that do not include a removalbe apron
access panel. Additional access may be
required to comply with local codes (illust.
1c & 1e).
NOTE: Preconstructed walls may require
modifications or additional framing members
to allow for pipes or fittings which protrude
from the unit on whirlpool equipped models.
Installation Procedure
NOTES:
1. 'Wet-set' is not required to support the
floor under an Oasis product due to the
encapsulated Balsa wood construction.
Illustration 1a - Unit Dimension & Alcove Framing Guidelines (dimensional tolerance +0 / -3/8")
BA-5429 L
Std Unit ABF Unit
(illustrated)
A
18-1/2"
B
17-1/4"
C
16"
D
1-3/4"
E
13-3/4"
14-1/2"
2-1/2" Dia. Overflow
30-1/4"
29"
2" Dia. Drain
14-1/2"
1-1/4"
8"
46"
1-5/8"
50-3/4"
54"
1-1/4"
Tub Deck
A
Apron
Style Line
E
D
Drain Clearance
Geneva 3260 / TR(G)-S-200 L
Geneva 3260 / TR(G)-IF-200 L (illustrated)
(S model apron
extends down
to room floor)
16"
32"
33-1/4"
16"
1-1/4"
4-1/4"
16-3/4"
15-3/4"
1" Drain Clearance
Overflow Center
2
2. Block base feet on skirted ("S" & "BA")
models are NOT pre-leveled and will NOT
be in contact with the room floor when
placed within the framing and leveled.
With the unit positioned in the alcove, sever-
al details must be checked prior to securing
the unit in place (illust. 2 & 3).
l Confirm the apron and/or the pre-leveled
unit base blocks are resting flush on the
floor
l Confirm drain position.
l Confirm the unit is level along each side
and across each end.
l Confirm the unit is square in the frame-
work.
Oasis units are pre-leveled at the factory,
however, site variations may require shim-
BA-R-41 L (illustrated)
19-3/4"
18-1/2"
17-1/4"
3"
15"
14-1/4"
29-1/4"
30-1/2"
15"
1-1/4"
8-1/2"
1-5/8"
2-1/2"
1-1/4"
Splash
D
B
13-1/4"
C
C Drain
Clearance
Overflow Center
Beveled Edge
Arm Rest
2-1/2" Dia. Overflow
2" Dia. Drain
Arm Rest
9-3/4"
50-1/4"
60"
Drain Center
Std Unit ABF Unit
A
B
C
D
2-1/2" Dia. Overflow
2" Dia. Drain
51-1/2"
22-3/4"
60"
1-1/4"
Drain Center
Geneva 3660 / TR-S-240 L
Geneva 3660 / TR-IF-240 L (illustrated)
(S model apron
extends down
to room floor)
1-1/4"
2"
21"
22-1/4"
ming to maintain level. If required, place
shims or filler material under the block
bases.
NOTE: Any material place under the base
to keep the unit level must be structurally
sound and applied to ensure the unit's
weight will be equally distributed over the
entire base.
The use of shims or filler material may also
be required behind the nailing flange at
each framing member to maintain the unit in
the proper position.
With the unit square and level in the alcove,
drill a 1/8" hole throught the nailing flange
at each framing member. Secure the unit
in place across the back wall first, followed
BA-R-51 L (illustrated)
18-1/2"
20-1/2"
17-1/4"
19-1/4"
1-1/2"
3-1/2"
14-1/2"
16-1/2"
15-7/8"
2-1/2" Dia. Overflow
32"
2" Dia. Drain
33-1/4"
16-1/8"
1-1/4"
8-1/2"
2-3/4"
B
D
A
13"
C Drain
Clearance
Overflow Center
Drain Center
Beveled Edge
17-3/4"
2-1/2" Dia. Overflow
36"
2" Dia. Drain
37-1/4"
18-1/4"
1-1/4"
10-3/8"
60"
4-1/4"
16-3/4
15-3/4"
1" Drain Clearance
Overflow Center
Drain Center
51-1/2"
22-3/4"
60"
1-1/4"
B
A
Arm Rest
Arm Rest
49-5/8"
1-1/4"
2"
21"
22-1/4"
Advertisement
