Information; Dehumidification Settings; Dehumidification Setting Options; Dehumidification Set Point - Lennox iComfort E30 Installation And Setup Manual

i
nFormation
The dealer information screen will appear. The next screen will be for dealer
information. Here either the dealer ID or phone number can be added. Once the
system is connected to the Internet, the remaining information is automatically
populated. Not all information for this screen will be viewable. Touch and hold and
then swipe up to access the remaining information on the screen.
Information Required: Dealer ID and / or dealer phone number. Information that
can be manually entered is name, email website, dealer address which includes
address 1, address 2, city state and zip/postal code. Once completed, touch the
left arrow at the top left side of screen to return to the Dealer Control Center.
IMPORTANT
Adding dealer information will ensure the thermostat is associated with your
LennoxPros.com account when connecting to the Lennox server.
Warning Screen: If the dealer ID or phone number is not provided, a warning screen
will appear. The warning screen will provided information on the limitation imposed
on the system if this information is missing. Touch no to return to the above screen
to complete the information requested or press yes to continue.
General Information
On this screen general information needs to be verified or changed. Touch any item
to change its contents. A pop-up screen will appear that will allow the information
to be added or changed.
Information Required:
1. Select desired language (ENGLISH, FRANÇAIS, ESPAÑOL).
2. Select country / region.
3. Select time and date which includes time, date, time zone, daylight savings
time (ON/OFF)
NOTE: When connected to INTERNET, then time and date can not be changed.
If the time and date is incorrect then turn off Wi-Fi and correct then turn
Wi-Fi back on.
4. Temperature unit (Fahrenheit or Celsius).
5. Once completed press continue.
On this screen general information needs to be verified or changed. Touch any line
item to change its contents. Information to be added is address 1, address 2, state,
city and zip/postal code.
Home Address
Complete the requested information and press the continue button.

Dehumidification Settings

All controls for dehumidification are under menu > settings > humidity. Under
Humidity Control, select dehumidify to enable dehumidification. By default it is
disabled.
When dehumidify is enabled, the options are as follows and are dependent on
equipment type and accessory installed.
D s o
EhumiDiFiCation Etting
• Normal — Recommend when the air outside is not too humid.
• Max — Single and Two-Stage Outdoor Units units without a Discharge Air
Temperature Sensor (DATS) Installed. Recommend when outdoor air is
excessively humid. May cool your home below the set temperature.
D s p
EhumiDiFiCation Et oint
Slide bar adjust with a range of 40% to 60%.
34
ptions