Rain Hood Inlet Skirt - Cambridge Engineering S Series Technical Manual

INSTALLATION INSTRUCTIONS

RAIN HOOD INLET SKIRT

1. Assemble the lower skirt section with the sheet
metal screws provided.
2. Assemble the upper skirt section with the sheet
metal screws provided.
3. Attach the upper skirt assembly to the lower skirt
assembly with the sheet metal screws provided.
4. Hang the upper skirt portion from the rear lip of
the rain hood and rotate forward into place. Secure
with the sheet metal screws provided.
Cambridge Engineering, Inc.
5. Clamp the skirt extensions on the inside of the
inlet skirt (as shown) so that the skirt extension is
flush to the exterior wall. Secure the extension to
the rain hood with the sheet metal screws provid-
ed. Secure the extension to the building exterior
with hardware provided by others. (Typical both
sides.)
6. Caulk all seams with silicone caulk.
20 S-Series Technical Manual