HORNE TSV1-3 Installation, Operating, & Maintenance Instructions page 4

Fig 4.
7) Connect the Supply Pipes
N.B. Ensure that the top cover of the panel is replaced prior to connecting up the supply pipes.
Connect the hot water supply to the left hand inlet, and cold water to the right-hand inlet (see Fig 5).
DO NOT OPEN THE WATER SUPPLIES AT THIS STAGE AS THEY HAVE NOT BEEN FLUSHED
OUT TO REMOVE THE DEBRIS IN THE PIPEWORK. SUCH DEBRIS CAN DAMAGE THE TSV1-3
VALVE.
Issue 4 June 2016
Horne Engineering Ltd
4