Midea CP012IU-PD Owner's Manual page 13

26.5 ~ 48.0
Window stool
Window stool
Foam seal
INSTALLATION INSTRUCTIONS(optional)
Installation in a double-hung sash
window
Foam seal A
(adhesive type)
1. Cut the foam seal(adhesive type) to the proper length and
2. Attach the window slider kit to the window stool. Adjust the
Fig.8
Window kit
3. Cut the foam seal(adhesive type) to the proper length
4. Close the window sash securely against the window.
Fig.9
5. Cut the foam seal to an appropriate length and seal the
Window kit
Fig.10
Fig.11
attach it to the window stool. Fig.8
length of the window slider kit according to the width of
window, shorten the adjustable window kit if the width of
window is less than 26.5 inches
Open the window sash and place the window slider kit on
the window stool. Fig.9
and attach it on the top of the window. Shown as in Fig.10
open gap between the top window sash and outer window
sash. Shown as in Fig.11.
10