Vmac RAPTAIR-MF Battery Boosting/Charging Instructions

Advertisement

Quick Links

RAPTAIR-MF
Battery boosting / Charging Instructions

Advertisement

Table of Contents
loading

Summary of Contents for Vmac RAPTAIR-MF

  • Page 1 RAPTAIR-MF Battery boosting / Charging Instructions...
  • Page 3: Ordering Parts

    Manuals are subject to change without notice. Ordering Parts To order parts, contact your VMAC dealer. Your dealer will ask for the VMAC serial number, part number, description and quantity. To locate your nearest dealer, call 1-800-738-8622 or online at www.vmacair.com Copyright 2016 All trademarks used in this manual are the property of the respective copyright holder.
  • Page 4: General Information

    Safety should be your first consideration in performing service operations. If you have any questions concerning the procedures in this manual or require any more information on details that are not included in this manual, please contact VMAC before beginning repairs. Safety Messages...
  • Page 5: Jump-Starting

    Do not attempt to jump-start the vehicle with the RAPTAIR-MF connected directly to starter. Start the RAPTAIR-MF and enable the generator switch. Set the “WELD” selector switch on the “Remote Weld Control” box to “0”. Connect the positive clamp to the positive terminal on the battery.
  • Page 6: Battery Charging

    If you have any questions or concerns, please contact VMAC Technical Support 1-888-241-2289. VMAC – Vehicle Mounted Air Compressors...
  • Page 8 VMAC – Vehicle Mounted Air Compressors Toll Free: 1-888-241-2289 Fax: 1-250-740-3201...

Table of Contents