Controls
6.2.1 Programming the default setpoint temperature
6720813761-06.1V
Fig. 15
"Program" key
▶ Touch the symbol
or
to select the desired temperature.
▶ Hold the "OK" button for 3 seconds to save the default set point temperature.
When the display stops blinking, the default set point temperature is saved in
memory.
Selecting the default setpoint temperature
In order to select the default setpoint temperature
▶ Touch the "OK" button.
Display shows the default setpoint temperature, which is now the hot water selected
setpoint temperature.
20
Bosch Remote Control – 6 720 813 643 (2019/03)