Prevent Rollover; Avoid Power Lines And Underground Utilities; Avoid Loud Noise; Maintenance Hazards - HOLT Eraser HGW 13 Operator's Manual

5.2.5 Prevent Rollover

The equipment may rollover, resulting in death or serious
injury. To help prevent rollover:
− Travel at a slow speed.
− Avoid sharp turns & sudden movement on slopes.
− Travel with rotor close to the ground.
− Avoid holes, ditches and other obstructions which
may cause equipment to rollover.
− Use caution when operating on slopes and do not
operate on excessively steep slopes.
5.2.6 Avoid Power Lines And
Underground Utilities
^
WARNING
Prevent electrocution.
Death or serious injury can result if
equipment comes near or contacts power
lines.
Electrocution can occur without direct
contact.
Have local utilities locate and mark under ground wires, cables,
pipelines and other hazards before grinding.

6.2.7 Avoid Loud Noise

^
WARNING
Prolonged exposure to loud noise can
cause impairment or loss of hearing.
Wear a suitable hearing protective device.

5.3 Maintenance Hazards

Before servicing, park machine on a firm and level surface, set
parking brake, chock wheels, and place a "Do Not Operate"
tag on engine controls. Read and understand this manual. If
you do not understand any part of this manual, contact your
dealer.
Always wear face and/or eye protection, safety shoes, and
other protective equipment appropriate for the job.
Always use Holt Industrial replacement parts.
^
WARNING
Moving parts can crush and cut.
Keep clear of moving components.
^
WARNING
Crushing and severing hazard.
Before performing inspections, service or
maintenance:
Park machine on firm, level surface.
•
Engage wheel lock.
•
Turn engine off.
•
^
WARNING
Entanglement hazard.
Keep clear of moving components.
^
WARNING
Prevent serious injury or death.
Wear proper protective equipment
appropriate for the job.
HOLT HGW13 Stump Grinder Operator's Manual | 9