Communication via AS-Interface
Addressing
Before it can participate in data exchange with the master, each node must be assigned an
address prior to commissioning of the AS-Interface network. To facilitate this, an addressing
unit is available.
For additional information on addressing, please refer to "Addressing via AS-Interface
(Page 82)".
Certification by the AS-International association
Siemens AS-Interface products are tested at an accredited test laboratory in accordance
with the relevant testing regulations and certified by the AS-International association.
40
SIRIUS 3RA6 Compact Starter
System Manual, 02/2008, GWA 4NEB 560 0601-02 DS 02