Siemens Sirius Series System Manual page 138

Service
13.2 Installing/Removing auxiliary and control conductor terminal blocks
Installing auxiliary and control conductor terminal blocks on the compact starter
Step
1
2
Removing auxiliary and control conductor terminal blocks from the compact starter
Step
1
2
3
136
Instructions
Insert the removable terminal block into
the device's mechanically coded
guiderail from the bottom.
Push the terminal block up and then
back until you hear it engage.
Make sure that you install the two
terminal blocks in the correct order.
Instructions
Push the terminal block's release clip
down.
Pull the terminal block out to the front.
Move the terminal block down and out
from the compact starter's mechanically
coded guiderail.
Image
2
1
2
1
Image
2
3
1
SIRIUS 3RA6 Compact Starter
System Manual, 02/2008, GWA 4NEB 560 0601-02 DS 02