Lascal BUGGYBOARD MAXI+ Owner's Manual page 6

4.
5.
THE ARMS
6.
B
A
2
1
B
- 6 -
4. Tightening the connectors
The connectors must be firmly attached to
the stroller. To further tighten the connectors,
only use a cotter-pin (80381) as a lever. Once
tightened, release the cotter pin by pushing
the red release button on the end of the con-
nector bolt (80395).
5. Before you cut the strap
There is no need to cut the strap if it does not
interfere with attaching the BuggyBoard or
stroller's folding mechanism. The strap could
be used on a different stroller in the future.
6. Rotate the arms forward
Turn the platform on to its wheels.
(A) Unlock the arms by twisting the height
adjuster (80241) until they are just released.
(B) Rotate the arms forward then lock in
position.