Universal Innovations Sahara Manual

3 burner roaster barbecue
Hide thumbs Also See for Sahara:

Advertisement

Quick Links

3 Burner Roaster Barbecue
2011
Photograph is not to scale. Specification
subject to change without prior notice
WARNING
FOR YOUR SAFETY
IF YOU SMELL GAS:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and contact your local dealer.
• For outdoor use only.
• Read instructions before using the appliance. Failure to follow
instructions could result in death, serious bodily injury, and/or
property loss.
• Warning: accessible parts may be very hot. Keep young children away.
• Do not move the appliance during use.
• Turn off the gas supply at the gas bottle after use.
• Any modification of the appliance, misuse, or failure to follow the
instructions may be dangerous and will invalidate your warranty.This
does not affect your statutory rights.
• Retain these instructions for future reference.
• Leak test your barbecue annually. Check the hose connections are
tight and leak test each time you reconnect the gas bottle.
FOR YOUR SAFETY
1. Do not store or use petrol or other flammable vapours or
liquids in the vicinity of this or any other appliance.
2. A gas bottle not connected for use shall not be stored in the
vicinity of this or any other appliance.
0 0 8 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sahara and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Universal Innovations Sahara

  • Page 1 3 Burner Roaster Barbecue 2011 Photograph is not to scale. Specification 0 0 8 6 subject to change without prior notice • For outdoor use only. • Read instructions before using the appliance. Failure to follow instructions could result in death, serious bodily injury, and/or property loss.
  • Page 2 Parts Supplied Ref Description Illustration Ref Description Illustration Vapourising Lockable Castor Large 10 Warming Rack Wheel 11 Barbecue Lid Side Frame Left and Right Metal Cross Bar Side T rays Gas Hose and Oak Cross Bar Spanner 14 Regulator Sink 15 Canvas Front Searing Grill Panel...
  • Page 3: Before You Start

    Fixings Supplied Ref: Description Illustration Ref: Description Illustration M6x65mm Spacer Bolt M6x12mm Insulation Philips Dome Washer Head Bolt M6x80mm Hinge Bolt Bolt Tools Required For Assembly • Flat Head Screwdriver • Philips Head Screwdriver • Adjustable Spanner Before You Start •...
  • Page 4: Assembly Step

    Assembly Step 1 Philips Dome Metal Cross Bar x1 Head Bolt x2 (ref:B) Lockable Large M6x65mm Bolt Castor Side Frame x2 Wheel x2 Wheel x2 Oak Cross Bar x1 (ref:A) x8 Assemble barbecue frame as shown. Tip: Ensure both large wheels are fitted to the right side and castor wheels to the left side.
  • Page 5 Assembly Step 2 Spacer M6x80mm Bolt x6 (ref:D) x6 (ref:C) Lay assembled frame on a clean surface on the ground and fit barbecue body to the frame as shown using 6 M6x80 Bolt (ref:C) and the 6 spacers (ref:D). Note: Fully tighten all bolts at this stage. Barbecue Sink Frame Assembled Barbecue...
  • Page 6 Assembly Step 3 Vapourising Bars x2 Searing Grill x1 Cooking Grill x1 1. Place vapourising bars in barbecue body as shown below. 2. Place porcelain enamel searing grill, cooking grill in position as shown. Ensure that the cooking grill is positioned directly above vapourising bars. Vapourising Bars Searing Grill...
  • Page 7 Assembly Step 4 Insulation Hinge Bolt Washer x2 Barbecue Lid x1 Warming Rack x1 (ref: F) x2 ref: (E) Connect the Barbecue lid using the 2 Hinge Bolts (ref:F) with red insulation washers (ref:E)as indicated below. Insert warming rack into barbecue as shown below. Hinge Bolt (ref: H) Page 7...
  • Page 8 Assembly Step 5 Side T ray x2 Slot the 2 side trays into the corresponding slots on side frame. Page 8...
  • Page 9 Assembly Step 6 Hose x1 Regulator x1 Hose Clip 1. Screw the hose connection onto the bottom of the barbecue as shown then gently pinch with a spanner to secure. DO NOT overtighten. 2. Fix regulator on the end of flexible gas hose and secure with hose clip. TIP- For ease of fitting gas hose lubricate ribbed nipple of regulator with a soap solution and heat the hose in warm water.
  • Page 10 Assembly Step 7 Canvas Front Panel x1 Drip Tray x1 Type AA 1.5V battery 1. Slide drip tray onto drip tray supports as shown in the image below. 2. Unscrew the ignition button and fit 1.5V type AA battery provided and screw back into position.
  • Page 11 Leak Testing • IMPORTANT – PERFORM LEAK TEST BEFORE USE • NEVER use an open flame to test for leaks at anytime, DO NOT IGNITE The BARBECUE DURING THE LEAK TESTING. • T o be performed in a well ventilated area. •...
  • Page 12: Use Instructions

    Connecting to the Cylinder • Confirm all barbecue control knobs are in the off position. • Connect the regulator to the gas bottle according to your regulator and bottle dealer’s instructions. Use Instructions Before proceeding, make certain that you understand the WARNINGS section of this manual. •...
  • Page 13: Care And Maintenance

    Care and Maintenance • Regularly clean your barbecue between uses and especially after extended periods of storage. • Ensure the barbecue and it’s components are sufficiently cool before cleaning. • Do not leave the barbecue exposed to outside weather conditions or stored in damp, moist areas. •...
  • Page 14 Warnings • This product is for OUTDOOR USE ONL Y . • Important – Ensure the barbecue is positioned on flat level ground to aid with fat/grease run off. • Important – LEAK TEST THE BARBECUE WHEN FULL Y ASSEMBLED BEFORE FIRST USE. IN ADDITION always leak test the unit annually, when dismantled, when parts are replaced, of if the gas cylinder is removed or replaced.
  • Page 15: Technical Data

    Heat Input: 13.5kW Burner: 3 Burner Injector Size: 1.0mm Gas/Pressure: Butane-28mbar/Propane-37mbar Gas Consumption: 980 grams per hour Specifications are subject to change without prior notice. This barbecue is manufactured by: Universal Innovations, Kilcoole Industrial Estate, Kilcoole, Co. Wicklow, Ireland. Page 15...
  • Page 16: Troubleshooting

    SAHARA BARBECUE GUARANTEE The Sahara barbecue is made by Universal Innovations. It is made to an exacting quality standard and is covered by the following guarantee. The product is fully guaranteed for 2 years, regarding proper use. THIS GUARANTEE DOES NOT AFFECT YOUR STATUTORY RIGHTS IN ANY WAY HELPLINE Dublin, Ireland: 00 353 (0)1 2873797 Email: info@uig.biz / Web: www.uig.biz...

Table of Contents