Assembly Instructions; Assembly Instructions With The Example Of D 610 - deconta D Series Instruction Manual

Negative Pressure Unit D-range
The negative pressure unit is delivered ex-works and ready for immediate operation.
If there are visible damages, do not operate the device.
Please contact the deconta GmbH at once.

6.1 Assembly instructions with the example of D 610

(the procedure for D 60, D 100, D 305 and D 910 is identical)
Please respect:
Basically the negative pressure units D 60, D 100, D 305, D 610 and D 910 can also
be operated directly in the dirty area (over pressure technique prevent the
infiltration of the surrounding contaminated air in the housing).
Because the devices are contaminated from outside and therefore need an
expensive cleaning after the end of the sanitation work, one should avoid the use
in the dirty area by all means.
 Connect the device with the wall between clean / and sanitation area
 Place it about. 100 mm in the sanitation area
 Seal the device with the wall
 Conduct the exhausted air hose in the open air
 Provide for enough supply air in the sanitation area
Clean area
Instruction manual

6 Assembly instructions

Contaminated area
Supply air opening with
self-closing flaps
Page 21