Maintenance And Cleaning; Cleaning The Detergent Drawer; Cleaning The Loading Door And The Drum; Cleaning The Body And Control Panel - Beko WMB 51021 PL PT User Manual

6

Maintenance and cleaning

Service life of the product extends and
frequently faced problems decrease if
cleaned at regular intervals.

Cleaning the detergent drawer

Clean the detergent drawer at regular
intervals as shown below in order
to prevent accumulation of powder
detergent in time.
1. Press the dotted point on the siphon
in the softener compartment and pull
towards you until the compartment is
removed from the machine.
C If more than normal amount of water
and softener mixture starts to gather
in the softener compartment, the
siphon must be cleaned.
2. Wash the detergent drawer and the
siphon with plenty of lukewarm water
in a washbasin. Wear protective
gloves or use an appropriate brush to
avoid touching of the residues in the
drawer with your skin when cleaning.
3. Insert the drawer back into its place
after cleaning and make sure that it is
seated well.
Cleaning the loading
door and the drum
Residues of softener, detergent and
dirt may accumulate in your machine in
time and may cause unpleasant odors
and washing complaints. To avoid this,
use the Drum Cleaning programme. If
your machine is not featured with Drum
Cleaning programme, use Cottons-90
programme and select Additional Water
or Extra Rinse auxiliary functions as well.
Before starting the programme, put
max. 100 g of powder anti-limescale into
the main wash detergent compartment
(compartment nr. II). If the anti-limescale
is in tablet form, put only one tablet into
compartment nr. II. Dry the inside of the
bellow with a clean piece of cloth after the
programme has come to an end.
C Repeat Drum Cleaning process in
every 2 months.
C Use an anti-limescale suitable for the
washing machines.
After every washing make sure that no
foreign substance is left in the drum.
If the hole on the bellow shown in the
figure is blocked, open the hole using a
toothpick.
C Foreign metal substances in your
machine will cause rust stains. Clean
the stains on the drum surface by
using cleaning agents for stainless
steel. Never use steel wool or wire
wool.
Cleaning the body
and control panel
Wipe the body of the machine with
soapy water or non-corrosive mild gel
65
EN