Child Lock; Progress Of Programme - Beko WMB 51021 PL PT User Manual

C If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode
and the illumination level of the
temperature, speed and loading
door indicator lights will decrease.
Other indicator lights and indicators
will turn off. Once the Programme
Selection knob is rotated or any
button is pressed, indicator lights and
indicators will turn on again.

Child Lock

Use child lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
C If the Programme Selection knob is
rotated when the child lock is active,
the lights on the 1
function buttons will blink 3 times.
The child lock does not allow any
change in the programmes and the
selected temperature, speed and
auxiliary functions.
C Even if another programme is
selected with the Programme
Selection knob while the Child
Lock is active, previously selected
programme will continue running.
C When the Child Lock is active and
the machine is running, you can
switch the machine to Pause mode
without deactivating the Child Lock
by turning the Programme Selection
knob to On / Off position. When
you turn the Programme Selection
knob afterwards, the programme will
resume.
To activate the Child Lock:
1. Press and hold 1
Function buttons for 3 seconds. The
and 2 auxiliary
st nd
and 2 Auxiliary
st nd
lights on the 1
buttons will flash while you keep the
buttons pressed for 3 seconds.
To deactivate the Child Lock:
Press and hold 1
function buttons for 3 seconds while any
programme is running. The lights on the
1 and 2 Auxiliary Function buttons will
st nd
flash while you keep the buttons pressed
for 3 seconds.
C In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On
/ Off position when no programme
is running, and select another
programme.
C
When the power is restored after a
power failure or after your machine
is unplugged and plugged in again,
the Child Lock will not be deactivated
when the machine resumes operating.

Progress of programme

Progress of a running programme
can be followed from the Programme
Follow-up indicator. At the beginning
of every programme step, the relevant
indicator light will turn on and light of the
completed step will turn off.
You can change the auxiliary functions,
speed and temperature settings without
stopping the programme flow while the
programme is running. To do this, the
change you are going to make must be in
a step after the running programme step.
If the change is not compatible, relevant
lights will flash for 3 times.
C
If the machine does not pass to the
spinning step, Rinse Hold function
might be active or the automatic
unbalanced load detection system
might be activated due to the
unbalanced distribution of the laundry
62
EN
and 2 Auxiliary Function
st nd
and 2 auxiliary
st nd