Programming Prompts - ADEMCO 7720V2 Installation Instructions Manual

Programming Prompts
Password If desired, the programming menu can be split into two menus by assigning passwords:
Protect ion a central
station menu (which contains all programming questions) and a subscriber
menu (which contains a subset of the central station menu).
If a password is assigned (for either menu), two menu selection prompts appear upon
entering programming mode:
1~[ 1-[
Enter 1 or 2 depending on which menu is to be accessed, then enter the appropriate
password when prompted. The first programming question in that menu is then
displayed. See EXITING PROGRAM MODE paragraph later in this section for assigning
and changing r swords.
Question 1.
Subscriber Information
ID #
Question 2.
Central Station Menu.
See Exiting Program
Mode, Setting
Defaults & Assigning
Passwords for Central
Station/Subscriber
Menu Option.
Question 3.
Central Station Menu
10dd (YIN)
I
15
MIN SUPV (Y/N)
Enter the 4-digit customer account number, 0001-9999.
Enter Y for odd flag (bit value 1), N for even system flag (bit
value O).
The 7720V2 reports its status periodically. Enter the desired
reporting interval as follows:
Y = Short form: every 15 minutes (6-hour window for COM-FAIL
report)
N = Shott form: every hour (standard 24 hour reporting for
COM-FAIL)
AlarmNet System Users (Private System users skip to #6)
Question
4.
I
Alarm Net [Y/N)
1 Enter Y if this is an AlarmNet installation. Enter N if this is a
Central Station Menu
1-----------
,.. ,
I Private System installation (skip to option 6).
Question 5.
~
Enter the primaty central station's system ID number, 1-7F. Not
Central Station Menu applicable for Private System users.
Private
System Users (AlarmNet users skip to
#8)
Question 6.
~ 'larmNetuseE
Enter the Private System routing code, O-7. Not applicable for
Question 7.
~ 'OrA1armNetusers
Enter the Private System channel number, 1-F. Not applicable
Central Station Menu
-11-