Subscribe to Our Youtube Channel
Related Manuals for ADIATEK ruby 48e
Summary of Contents for ADIATEK ruby 48e
- Page 1 48e 06 2018 Use and maintenance Warning! Please read the instructions before use.
-
Page 3: Table Of Contents
INTRODUCTORY COMMENT Thank you for having chosen our machine. This floor cleaning machine is used for the industrial and civil cleaning and is able to clean any type of floor. During its advance movement, the combined action of the brush and the detergent solution removes the dirt which is aspirated through the rear suction assembly, giving a perfectly dry surface. -
Page 4: General Rules Of Safety
GENERAL RULES OF SAFETY − Where parts are required, ask for ORIGINAL spare parts from the distributor and/or from an authorized dealer. − Use only ORIGINAL brushes. The rules below have to be followed carefully in order to avoid injury −... -
Page 5: Technical Description
TECHNICAL FEATURES ruby 48e Working width Squeegee width sqm/h 1700 Work capacity, up to sqft/h 18.300 1 x 485 Brush diameter 1 x 19 Brush RPM (rpm) Brush pressure lbs. Brush motor Suction motor mbar Suction motor depression water lift Speed type semi-aut. -
Page 6: Symbology On The Machine
SYMBOLOGY ON THE MACHINE Symbol denoting the solution valve. Indication of the maximum temperature of the Indicates on the instrument board the signal solution detergent. lamp of the solenoid valve. It is placed near the charging hole of the Indicates the solution valve lever. solution tank. -
Page 7: Legend Instrument Board And Controls
LEGEND INSTRUMENT BOARD AND CONTROLS BRUSH MOTOR SWITCH RESTORABLE FUSE BRUSH MOTOR SUCTION MOTOR SWITCH OPERATOR PRESENCE LEVER SIGNAL LAMP FOR PRESENCE OF THE TENSION SQUEEGEE LIFTING LEVER SIGNAL LAMP SOLENOID VALVE ON SOLUTION VALVE LEVER LEGEND MACHINE BRUSH BASE GROUP INLET OPENING SQUEEGEE HOSE PLUG EXHAUST HOSE RECOVERY TANK SUCTION COVER... -
Page 8: Before Use
BEFORE USE A label placed near the two registers (5) indicates rotation sense to increase or reduce the height. HANDLING OF THE PACKED MACHINE Note: The wheels of the squeegee support must be adjusted through The machine is supplied with suitable packing foreseen for fork lift the registers (5) at the same height so that the squeegee works truck handling. -
Page 9: Brush Assembly And Disassembly
BRUSH ASSEMBLY AND DISASSEMBLY Take off the electric supply to the machine by unplugging the plug. Acting upon the pedal lift the brush base group. With the brush base group in lifted position, insert the brush into its plate seat underneath the brush base turning it until the three metal buttons are properly seated in their slots;... -
Page 10: Floor Cleaning
FLOOR CLEANING STARTING OF THE MACHINE The machine is equipped with a mains cable complete with a plug for the connection to the mains system and with a socket connector to insert inside the plug (6) situated underneath the instrument board. 1. -
Page 11: Stop Of The Machine After Cleaning Operation
STOP OF THE MACHINE AFTER CLEANING OPERATION Before executing any type of maintenance: Lift the brush base. Lift the squeegee by pressing lever (3). Turn off the brush motor with the switch (1). Turn off the suction motor with the switch (2). Take off the plug from the mains socket. -
Page 12: Squeegee Hose Cleaning
TWO-MONTHLY MAINTENANCE FRONT SQUEEGEE RUBBER REPLACEMENT Check the wear of the squeegee rubber and eventually replace it. For the replacement it is necessary to: Take off the squeegee hose (3) from its coupling. Disassemble the squeegee from the support rotating the lever (2) counterclockwise and sliding the stud bolts (1) in their slots. -
Page 13: Six-Monthly Maintenance
Replace the front rubber. To reassemble the squeegee repeat reverse the operations above- mentioned. SIX-MONTHLY MAINTENANCE SPLASH GUARD REPLACEMENT Unscrew the knobs in the rear part of the brush base group from the extremity of the metal strips. The operation has to be carried out on both splash guards. -
Page 14: Programmed Maintenance
PROGRAMMED MAINTENANCE PERIODIC ORDINARY MAINTENANCE CHART DAILY PERIODIC INTERVENTION • RECOVERY TANK CLEANING • SUCTION FILTER CLEANING • SOLUTION TANK FILTER CLEANING • BRUSH CLEANING • BRUSH DISASSEMBLY AND CLEANING • SQUEEGEE CLEANING • FRONT SQUEEGEE RUBBER CHECK • REAR SQUEEGEE RUBBER CHECK •...
Need help?
Do you have a question about the ruby 48e and is the answer not in the manual?
Questions and answers