Related Manuals for ADIATEK ruby 45c
Summary of Contents for ADIATEK ruby 45c
- Page 1 45c 10 2015 Use and maintenance Attention! Please read the instructions before use.
-
Page 3: Table Of Contents
SUMMARY LEGEND INSTRUMENT BOARD AND CONTROLS LEGEND MACHINE OPTIONAL ACCESSORIES TECHNICAL DESCRIPTION INTRODUCTORY COMMENT GENERAL RULES OF SECURITY SYMBOLOGY BEFORE USE Handling of the packed machine Unpacking of the machine Battery installation and setting of the battery type Battery recharger Incorporated battery recharger (optional) Batteries recharging Batteries recharging with incorporated battery recharger (optional) -
Page 4: Legend Instrument Board And Controls
LEGEND INSTRUMENT BOARD AND CONTROLS SWITCH BRUSHES MOTOR SWITCH WITH KEY (OPTIONAL) DISPLAY CHARGE LEVEL BATTERIES/HOUR METER LEVERS FORWARD MOVEMENT PUSH BUTTON VISUALIZATION HOUR METER (DISPLAY) LEVER SOLUTION VALVE SWITCH SUCTION MOTOR LEVER SQUEEGEE LIFTING SIGNAL LAMP SOLUTION VALVE OPEN 10. -
Page 5: Optional Accessories
OPTIONAL ACCESSORIES Brushes motor overload protection device Switch with key Emptying device of the solution tank Incorporated battery charger TECHNICAL DESCRIPTION ruby 45c Cleaning width Squeegee width Working capacity, up to sqm/h 1670 Brushes diameter 2x95 Brushes rpm Pressure on the brushes... -
Page 6: Introductory Comment
INTRODUCTORY COMMENT - Be sure the recovery tank is empty before remov- Symbol denoting the open Thank you for having chosen our machine. This floor ing it. book. cleaning machine is used for the industrial and civil - Restore all electrical connections after any mainte- Indicates that the operator has cleaning and is able to clean any type of floor. -
Page 7: Before Use
BEFORE USE your recharger, following the instructions given by the manufacturer. HANDLING OF THE PACKED MACHINE The machine is supplied with suitable packing fore- ATTENTION: seen for fork lift truck handling. The total weight is 95 kg. This operation must be carried out by qualified staff. Packing dimensions: A wrong or faulty cable connection can create seri- Base: 118 cm x 67 cm... -
Page 8: Batteries Disposal
HOUR METER In order not to cause permanent damages to the batteries, it is necessary to avoid their complete dis- The machine is equipped with an hour meter located charge, providing for the recharging within a few on the same display of the battery charge level indi- minutes after batteries discharge signal starts blink- cator (1). -
Page 9: Recovery Tank
FLOOR CLEANING ADJUSTMENT OF THE BRUSHES PRESSURE Through the register (1) placed on the internal part CONNECTION OF THE BATTERIES TO THE MA- of the front right wheel, it is possible to adjust the CHINE brushes pressure on the cleaned surface. Plug in the batteries connector (1) to the machine By turning the wing nut clockwise the pressure in- connector (2), placed in the rear part of the machine. -
Page 10: Emptying Detergent Solution
EMPTYING DETERGENT SOLUTION ATTENTION: To empty the detergent solution remained in the so- lution tank: Moving the machine backwards, make sure that the 1. Bring the machine to an appropriate place for squeegee is lifted. tanks draining. 2. Unscrew the solution tank cap (1). STOP MACHINE AFTER... -
Page 11: Squeegee Cleaning
SQUEEGEE CLEANING 1. Take off the hose from the squeegee coupling (1) Keeping the squeegee clean guarantees always the and release the guide spring of the suction hose (2). best drying action. 2. Wash the inside of the hose with a water jet, For the cleaning it is necessary to: from the squeegee hose side. -
Page 12: The Suction Motor Does Not Work
Pb24: Indication battery check card set for lead bat- ATTENTION: teries. GE24: Indication battery check card set for gel bat- Never leave the batteries discharged for a long time. teries. THE MOTORS DO NOT FUNCTION AL01: Signal indicating an absorption of excessive current of the brushes motor, only on machines If the machine is supplied with the incorporated bat- equipped with the overload protection device for the... -
Page 13: Programmed Maintenance
Please be aware that when brushes bristles are worn out and therefore too small, they become rigid and unable to penetrate and clean deeper. This may also happen with thicker bristles creating brush vibration. MACHINE CODE QUANTITY DESCRIPTION ruby 45c 48901200 Cylindrical brush nylon 0,6 Ø 95x462 48901210 Cylindrical brush PPL 0,4 Ø 95x462 48901220 Cylindrical brush PPL 0,3 Ø...
Need help?
Do you have a question about the ruby 45c and is the answer not in the manual?
Questions and answers