Lehle PARALLEL SW II Operating Instructions Manual page 18

5. Connect your amplifier or another tar-
get device to the Output socket (6) of the
LEHLE PARALLEL SW II.
6. Use the True-Bypass switch (12) to
switch between the mix of device 1 + de-
vice 2 (the LED will then show blue) and
the signal from device 1 only (LED white).
7. Done!
If you connect a mono signal to the in-
put socket (1) and a stereo signal to the
return socket (5), please press the mono-
to-stereo switch (2) too.
Check the overall sound for any phase
cancellations and, if necessary, press the
phase reverse switch (4) on the LEHLE
PARALLEL SW II.
LEHLE GmbH · Germany · www.lehle.com · support@lehle.com
MORE EXAMPLES
18
R S
M I X
R S
PA R A L L E L
M A D E I N G E R M A N Y
R S
M I X
R S
PA R A L L E L
M A D E I N G E R M A N Y
R S
M I X
R S
PA R A L L E L
M A D E I N G E R M A N Y