Installation - ABB PDP32.0 Manual

5 U N I V E R S A L M O T O R C O N T R O L L E R U M C 1 0 0 . 3
—

Installation

Mechanical installation
The PROFIBUS interface module PDP32.0 can be mounted either on the UMC100.3 itself or separately from the UMC100.3
using the single mounting kit (SMK3.0).
Mounting the PDP32.0 on the UMC100.3
When the module is installed directly on the UMC100.3 the UMC100.3 with PDP32.0 acts like a device with integrated
PROFIBUS communication. No additional accessories are needed.
Power
—
01 Image shows UMC100.3 DC
Move down PDP32.0 until
snapped-in to fix PDP32.0 on UMC100.3