aXbo Sleep.Phase.Alarm.Clock Instruction Manual page 7

Once arrived at your destination, please
3.) Unlock keys
>> Press [back] 10 and [home] 12 together for 2 seconds
4.) Activate sensor(s)
>> Press [push] 14 button on the wristband continually for 5 seconds
Upon release, the display will show, whether the sensor was deactivated for person 1 or person 2:
SENSOR 1 ON or SENSOR 2 ON.
Note:
To check if the sensor has been successfully deactivated, press [push]
display light comes on for a short time, the sensor is now active.
3.6 Display light
Once you are asleep, the display light will "fall asleep" too. It is dimmed to slumber mode. aXbo
uses less energy this way and your sleep is not disturbed by any light.
If you press [push] 14 on your wristband, the display light will come on briefly, the alarm time is
displayed for approx. 10 seconds and the display light fades out again.
The slumber mode also helps prolong the working time of your batteries (especially helpful
on travel).
14 on the wristband; if the
14
3.7 Manual charging of batteries
Any time you plug in the adapter, the batteries are recharged. As aXbo uses an intelligent char-
ging system, batteries are also recharged during continuous plug-in operation once a certain low
battery level has been reached.
3.8 Reset
Reset will return the alarm clock back to the settings at delivery; all selected settings and sleep
data will be irrevocably erased.
>> Press [back] 10 + [click] 11 + [home] 12 together for 3 seconds
>> [scroll] 11 to RES.YES > [click] 11 confirm
All settings are now cancelled and your sleep data erased.
aXbo automatically returns to standby mode and can be newly set.
15