Download Print this page

Pro-Elec PEL00925 Manual page 4

3kw over door air curtain heater

Advertisement

OPERATION
After finishing the installation, and switching on the power,
switch the larger switch ON.
This powers just the fan so the curtain can provide
cooling air.
The heating is controlled by the two smaller switches
marked I and II.
Switch I allows warm air (1500W) to be delivered and switch II allows hot air
(3000W) to be delivered.
If the unit overheats, an inbuilt thermal switch will cut the power and restore supply
when the unit has cooled down again.
However severe overheating will cause internal thermal fuses to isolate and cut the
power for safety. These will not reset and are not user replaceable.
Please contact a qualified electrician for repair having first ascertained what caused
the air curtain to overheat and remedied it - airflow restriction, excessive dirt etc.
CLEANING AND MAINTENANCE
Disconnect the mains supply from the appliance and wait for it to cool completely
before cleaning.
Clean with a soft damp cloth.
Do not use any chemicals, abrasives or solvents that could damage the appliance.
SPECIFICATIONS
Voltage:
Rated Power:
Air Volume:
Air Velocity (max):
Noise Level:
Net Weight:
Dimension:
Gross Weight:
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling of
the materials used. Contact your local authority for details of recycling schemes in your
area.
240V~/50Hz, Class I
254m³/hrs
620×155×230mm
4
3000W
4.8m/sec
60dB
5.2Kg
5.9Kg
Made in China. PR2 9PP
Man Rev 1.1

Advertisement

loading