3. DISP PLAY AN ND KEY Y DESCR RIPTION KEYS FUNCT TIONS To turn n the scale o on or off. To zer ro the scale if the displa ay drifts from m zero. To tare e the scale, if necessary To tog ggle the weig ghing unit be...
Page 5
Make sure the screws are securely tightened. 318503 www.globalindustrial.com ...
6. Check the calibration by putting the weight that you calibrated at back on the scale, if it is off repeat the calibration process again. 318503 www.globalindustrial.com ...
<LF>< reading, minus, decimal point, weight unit>GR<CR><EXT> Or <LF>< reading, minus, decimal point, weight unit>NT<CR><EXT> 318503 www.globalindustrial.com ...
Page 13
<ETX> ---Scale is stable, and the current weight unit is kg or lb. With or without decimal point and the position is as per the P9 setting and current unit. 318503 www.globalindustrial.com ...