Table of Contents
Advertisement
Initializing the system with an Apple Macintosh computer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To initialize a new system with an Apple Macintosh computer, use the
initialization tool that was shipped with your order.
Before you begin
v Begin this procedure after you have installed all the enclosures, drives and other
options you have purchased.
v You need a personal computer to complete the initialization procedure. The
personal computer must have:
– A USB port
– A supported browser (see "Web browser requirements to access the
management GUI" on page 27)
For best results, the personal computer and the Storwize system must be
connected to the same network.
About this task
This procedure is valid for Apple MacOS X 10.7.
v Use this procedure only when initializing a new control enclosure (with,
optionally, one or more expansion enclosures).
v Do not use this procedure when adding an expansion enclosure to an existing
system.
Procedure
To initialize the system, complete the following steps.
1. Gather the information you will use to configure the system.
v You must have the IP network address you will use to manage the system.
– IP address
– Subnet mask
– Gateway
v Other information is optional, but useful for enabling additional
capabilities.
– The IP address of a Network Time Protocol (NTP) server for automated
setting of date and time
– The IP address of a simple mail transfer protocol (SMTP) server for
sending notificatication of alerts
2. Locate the USB flash drive that was shipped with your order in the
documentation package.
3. Insert the USB flash drive into a USB port on the personal computer.
4. Open a terminal window.
5. Locate the root directory of the USB flash drive. The root directory is usually
located in the /Volumes/ directory.
6. Type: sh InitTool.sh The initialization tool wizard starts.
7. In the wizard, click Next and select Create a new system.
8. Follow the on-screen instructions given by the initialization tool. You will be
instructed to complete the following actions:
a. Enter the details of the system management address you wish to use.
b. Take the USB flash drive to the Storwize system and allow it to initialize.
Chapter 3. Configuring the system
31
Hide quick links:
Advertisement
Table of Contents
