Page 1
Technical documentation ELECTRIC HEATED AIR CURTAIN MODELS: AERIS 100EN-3P AERIS 150EN-3P AERIS 200EN-3P...
Page 2
Proceeding due to the following instruction guarantees the correct usage and safety. In case of any doubts please contact Reventon Group sp. z o. o. [Ltd.]. The supplier reserves the rights to make changes to the technical documentation without previous notice.
Page 3
3. INSTALLATION a) wall mounting 3.1. GENERAL PRINCIPLES - unscrew the fixing screws to remove the mounting plate from the back of the main body The following figures show minimum distances between the air curtain and the building partition: - install mounting plate on the wall -install the main body.
Page 4
- maintenance and repair work must be carried out by a qualified personnel 6. CONTROL familiar with local regulations and standards The device can operate in cooling mode (heaters are turned off, the mode - always unplug or disconnect the appliance from the power supply before is signilised by green diode) or in one of three heating modes - the low one (I heating level, it is signilised by one red diode), the middle one (II heating level, installation, servicing or cleaning the unit...
Page 5
VIII. Any changes in the Warranty Terms, improper use of the product (careless handling, exposure to liquids, moisture, corrosion), as well as traces of selfrepairing (non by the Reventon Group) or alterations cause, the warranty is not valid. IX. Not following to any of warranty regulations makes the warranty not valid.
Need help?
Do you have a question about the Aeris Series and is the answer not in the manual?
Questions and answers