Verifying Functionality - Harmonic Spectrum MediaStore Series Component Replacement Manual

Chapter 4: MediaStore chassis replacement
8. If you are replacing a MediaStore 7200, remove the fan modules from the original chassis and install
them in the replacement chassis.
9. Rack mount the new chassis.
For details, refer to "Rack mounting instructions" in the Spectrum System Installation Guide.
10. Install the disk drives in the new chassis in the same order and drive bay slot assignments as they
had in the original chassis.
For details, refer to "Installing a disk drive" in this guide.
11. Cable the new MediaStore to the MediaDirector.
Refer to "Connecting MediaDirectors and MediaStores using SAS" in the Spectrum System
Installation Guide for complete instructions.
12. Power up the Spectrum system.
Refer to "Powering up" in the Spectrum System Installation Guide for complete instructions.

Verifying functionality

Harmonic recommends that you verify functionality of the replacement equipment in your Spectrum
system before using it on air.
28