Honda CRF250L 2019 Owner's Manual page 89

Remove the brake caliper bracket, rear
7.
wheel and side collars.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not push the brake pedal while the
u
wheel is removed.
Installation
To install the rear wheel, reverse the
1.
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Tyre Puncture
Make sure that the slot on the brake
2.
caliper bracket is positioned in the lug on
the swingarm.
Brake caliper bracket
Swingarm
Removing Wheels
u
Lug
Slot
Continued 85