Honda CRF250L 2019 Owner's Manual page 62

Engine Oil Changing Engine Oil & Filter
u
Install a new oil filter with the "OUT-SIDE"
7.
mark facing out.
Install the spring into the oil filter cover,
8.
and then install a new gasket and oil filter
cover by tightening the oil filter cover
bolts.
Torque: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Install a new sealing washer onto the
9.
drain bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
Fill the crankcase with the recommended oil
10.
( P. 44, P. 107) and install the oil fill cap.
2 2
Required oil
When changing oil & engine oil
filter:
1.5 L (1.6 US qt, 1.3 Imp qt)
When changing oil only:
1.4 L (1.5 US qt, 1.2 Imp qt)
58
Check the oil level.
11.
Check that there are no oil leaks.
12.
NOTICE
Improper installation of the oil filter can result in
serious damage to the engine.
Spring
Oil filter cover
Gasket
Oil filter cover bolts
P. 55
2
Oil filter
"OUT-SIDE" mark