Pioneer VSX-1021-K Quick Start Manual page 11

Connecting your TV and playback components
Connecting using HDMI
If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player (BD), etc.), you
can connect it to this receiver using a commercially available HDMI cable.
If the TV and playback components support the Control with HDMI feature, the convenient Control
with HDMI functions can be used (see Control with HDMI function on Operating Instructions in
CD-ROM).
HDMI/DVI-compatible
Other HDMI/DVI-
Blu-ray Disc player
equipped component
HDMI OUT HDMI OUT
VSX-1021
only
HDMI IN VIDEO IN BD IN DVD IN DVR/BDR IN OUT
1
ASSIGNABLE 1
CONTROL VIDEO AUDIO
ZONE 2 DVR/BDR CD-R/TAPE ZONE 2
IN
ADAPTER PORT
OUT L
TV/SAT VIDEO (OUTPUT 5 V
OUT
IN IN
OUT OUT
MONITOR 0.1 A MAX)
OUT
IR
IN R
ANTENNA
FM UNBAL
OUT DVR/ CD
BDR 75
L
AM LOOP
IN IN
OUT IN DVD IN
IN 1
R
(DVD)
ASSIGN
ABLE
IN 2 L
(DVR/
BDR) IN
IN
R
SUBWOOFER
MONITOR
OUT Y P P TV/SAT VIDEO DVD
B R
COMPONENT VIDEO PRE OUT
! For input components, connections other than HDMI connections are also possible (see
Connecting your DVD player with no HDMI output on page 11 ).
! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio
cables.
— When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC
(Audio Return Channel) function, the sound of the TV is input to the receiver via the HDMI OUT
terminal, so there is no need to connect an audio cable. In this case, set TV Audio at HDMI Setup
to via HDMI (see HDMI Setup on Operating Instructions in CD-ROM).
HDMI/DVI-compatible
monitor
Select one
HDMI IN
AUDIO OUT
DIGITAL OUT
ANALOG
COAXIAL OPTICAL R L
This connection is
required in order to
listen to the sound of
the TV over the
receiver.
COAXIAL
LAN (10/100) ASSIGNABLE
IN IN
IN 1 IN 2
DC OUTPUT 1 2
OPTICAL
for WIRELESS LAN
ASSIGNABLE
(OUTPUT 5 V
0.6 A MAX) ( DVD ) CD ( ) ( TV/SAT ) ( DVR/BDR )
FRONT CENTER SURROUND SURROUND BACK / ZONE 2
A
R L R L R L (Single)
CAUTION: ATTENTION:
SEL
SPEAKER IMPEDANCE ENCEINTE D'IMPEDANCE DE
SPEAKERS
6 -16 . 6 -16 . SEL
Connecting your DVD player with no HDMI output
This diagram shows connections of a TV (with HDMI input) and DVD player (or other playback com-
ponent with no HDMI output) to the receiver.
HDMI/DVI-compatible
monitor
HDMI IN
HDMI IN VIDEO IN BD IN DVD IN DVR/BDR IN OUT
1
ASSIGNABLE 1 DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V 0.6 A MAX)
CONTROL VIDEO AUDIO
DVR/BDR CD-R/TAPE ZONE 2
ZONE 2
IN
ADAPTER PORT
OUT L
TV/SAT VIDEO (OUTPUT 5 V
OUT
IN IN
OUT OUT 0.1 A MAX)
MONITOR
OUT
IR
IN R
ANTENNA
DVR/ CD FM UNBAL
OUT
75
BDR
L
AM LOOP
A FRONT
OUT IN DVD IN IN IN
R
IN 1
R
(DVD)
ASSIGN
ABLE
IN L
2
(DVR/
BDR) IN IN
R
SUBWOOFER
MONITOR
OUT
Y P P TV/SAT VIDEO DVD CAUTION: ATTENTION:
B R
PRE OUT SPEAKER IMPEDANCE ENCEINTE D'IMPEDANCE DE
COMPONENT VIDEO
6 -16 . 6 -16 .
! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio
cables (page 11).
— When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC
(Audio Return Channel) function, the sound of the TV is input to the receiver via the HDMI OUT
terminal, so there is no need to connect an audio cable. In this case, set TV Audio at HDMI Setup
to via HDMI (see HDMI Setup on Operating Instructions in CD-ROM).
! If you use an optical digital audio cable, you'll need to tell the receiver which digital input you
connected the player to (see The Input Setup menu on Operating Instructions in CD-ROM).
Connecting your equipment
DVD player, etc.
Select one Select one
VIDEO OUT
AUDIO OUT DIGITAL OUT
COMPONENT VIDEO OUT
VIDEO
ANALOG
R L COAXIAL OPTICAL
P
R
COAXIAL
LAN (10/100) ASSIGNABLE
IN IN
IN 1 IN 2
1 2
OPTICAL
ASSIGNABLE
( DVD ) ( CD ) ( TV/SAT ) DVR/BDR ( )
CENTER SURROUND SURROUND BACK / ZONE 2 FR
L R L R L (Single)
SELECTA
SPEAKERS
SELECTA
02
P
Y
B
11
En