Changing The Cover; Maintenance - Technical Data - Euroflex SMOOTH B2S Instruction Manual

Changing the Cover

With continuous use, the cover which is fitted with a drawstring is
subject to wear and should be replaced regularly. Due to the design of
this ironing system which incorporates a heated ironing surface and
to guarantee the correct performance of the product,we recommend
that you use only Euroflex ironing board covers.
Metalised heat reflective covers and covers with thick lining are not
suitable for this ironing system and may cause overheating of the
suction motor.
Warning!
In case of failure due to faulty material or if damage results due to
the appliance falling over or being dropped, immediately remove the
plug from the socket. Repairs should be performed exclusively by
an authorised Service Centre. Repairs performed by unauthorised
personnel may cause serious hazards for users. No responsibility
or liability is assumed for injury to persons or damage to property
caused by repairs performed by unauthorised personnel or where
parts have been used that are not approved by the manufacturer. In
such cases the manufacturer's warranty is voided.
6
TECHNICAL DATA
Voltage:
Rating:
Board dimension:
Net weight:
Cable lenght:
Tank capacity:
220-240V ~ 50/60Hz
1950W
117 x 50 x 14 cm
14.6 kg
2.5 mt
0.8 L

Maintenance - Technical Data

15