Suction Function; Blowing Function - Euroflex SMOOTH B2S Instruction Manual

DRY IRONING
• Put the iron on the iron-rest mat (20).
• Turn the appliance on (power button 1). Simultaneously, the orange
warming-up indicator light on the iron lights up (11). Later it switches
off as soon as the soleplate reaches the required temperature.The
iron reaches the required temperature after 3-5 minutes.
• To dry iron DO NOT press the steam button.
After dry ironing
- Turn off the appliance (on/off switch 9).
- Pull the plug out of the mains socket. Let the appliance cool down
completely.
3
SUCTION/BLOWING FUNCTION
AND HEATING OF THE BOARD
The suction absorbs the excess steam, which
is no longer used after the ironing process. The
suction helps hold the garment on the ironing
surface and helps to dry the garment. Garment
ironed with this board are ready to be placed
straight in the wardrobe without further airing.
The heated ironing surface stays dry, and keeps the steam hot so
that it passes through the board to be expelled without condensing.

SUCTION FUNCTION

With the suction function, light fabrics (silk etc.) can be held in
place on the ironing board, preventing them from slipping.
The suction function cools and sets the fabric during ironing,
guaranteeing no wrinkles.
• To activate the suction function set the selector switch on
position "I" (6).

BLOWING FUNCTION

The blowing function allows you to iron on a pillow of air without
applying downward pressure. This makes ironing of delicate items,
or difficult areas (trousers folds, pockets, seams, difficult areas to
reach), much easier and avoids the visible signs or seam crushing.
• To activate the blowing function set the selector switch on
position "II" (5).
12
Starting the Appliance
MADE
IN
ITALY
B2S
UP
AIR
DOWN
FUNCTION SWITCH