Advertisement
INSTALLATION NOTES:
4. Repair/Replacement Instructions
Standard Optics ( 20º, 40º, and 60º)
1.
The "non-user replaceable light source" must be serviced by
Hunter-qualified personnel in a manner consistent with its in-
tended use and in compliance with all local and provincial codes.
Unfasten faceplate and housing screws, using a ⅛" (3.2 mm)
Allen wrench. Remove by lifting cap upward. Avoid using metal
tools to protect the powder coat finish.
2.
Lift cartridge arm and turn counterclockwise to
release lock. Pull complete cartridge out of
luminaire housing.
ARCHITECTURAL & LANDSCAPE LIGHTING
nBeckon-
26
B1 FORMAT REVISION 08/27/12
4
Faceplate and Lens
D
C
B
B1 FORMAT REVISION 08/27/12
4
A
D
4
C
B
A
|
holmlighting.com
4
3
3.
Rotate cartridge arm back into the neutral position.
Twist the optic counterclockwise and pull outward to
remove the optic.
3
4.
E0000
REV
ECO
3
Unfasten one screw only inside the cartridge using
a #2 Phillips screwdriver.
3
2
Note: Do not remove adhesive
thermal pads. Premature
failure may result.
2
UNLESS OTHERWISE SPECIFIED:
SURFACE FINISH:
N/A
THIRD ANGLE PROJ.
.XXXX = ±.0005
ALL DIMENSIONS ARE IN INCHES
AAA
7/22/2012
DO NOT SCALE DRAWING
REVISION DESCRIPTION
DRFT
DATE
APVD
2
UNLESS OTHERWISE SPECIFIED:
SURFACE FINISH:
Customer Service 1-844-200-4656
THIRD ANGLE PROJ.
ALL DIMENSIONS ARE IN INCHES
E0000
AAA
7/22/2012
REV
ECO
REVISION DESCRIPTION
DRFT
DATE
APVD
2
6
CONFIDEN
THIS DRAWING/DOCUMENT CONTAINS TRADE SECRET INFO
DISCLOSURE OF THIS INFORMATION TO THIRD PARTIES ARE
NO PATENT LICENSE IS GRANTED TO ANY INVENTIONS DESC
THIS DRAWING/DOCUMENT CO
DISCLOSURE OF THIS INFORMA
NO PATENT LICENSE IS GRANTE
DENOTES CRITICAL INSPECTION POINTS
DENOTES FUNCTIONALLY CRITICAL POINTS
SCALE:
SIZE:
C
DIMENSIONAL
1:1
TOLERANCES:
REL.
TITLE:
.XX = ±.01
DATE:
.XXX = ±.005
CREST, ASSEM
DRAWN
JG
BY:
±1°
CHECKED
PRODUCT:
ANGLES:
BY:
DESIGNER:
MATERIAL:
N/A
PRINT
5/11/2016
DATE:
DENOTES CRITICAL INSPECTIO
DENOTES FUNCTIONALLY CRIT
SCALE:
SIZ
DIMENSIONAL
1:1
TOLERANCES:
N/A
REL.
TITL
.XX = ±.01
DATE:
CR
.XXX = ±.005
DRAWN
JG
.XXXX = ±.0005
BY:
±1°
ANGLES:
CHECKED
PRO
BY:
DESIGNER:
MAT
N/
PRINT
DO NOT SCALE DRAWING
5/11/2016
DATE:
Advertisement
