Tools And Materials; Before You Begin - Sterling Plumbing Pivot Shower Doors SP1500D Series Installation Manual

Tools and Materials

Tape
Measure
Phillips
Screwdriver
Scissors

Before You Begin

CAUTION: Risk of personal injury. Always wear safety glasses when cutting materials.
IMPORTANT! Pay special attention to the section titled "Very Important Instructions." Failure to follow
the directions could result in product damage.
IMPORTANT! This shower door is designed to be specifically paired with a Sterling shower module. Do
not install this shower door if you do not have a Sterling shower module installed.
IMPORTANT! Record the model number on the Homeowners Guide if you intend to save it, or in your
records for later use. The proper model number will enable our customer service representatives to quickly
help you if needed.
NOTE: When using a retractable case tape measure, add the length of the case to the measurement or
measure in a manner that excludes the case.
Your new Sterling door can be installed with the door opening to either the right or left. Install the
door with the pivot side away from the showerhead for best results.
Before starting the installation, lay out and identify all of the parts. Inspect them for damage.
Closely follow the instructions pertaining to the sealant application on the door. Sealing areas other
than those shown may cause leaking.
Two people should perform this installation.
Sterling reserves the right to make revisions to the design of products without notice, as specified in
the Price Book.
1034026-2-D
Pencil Safety Glasses
Center
Silicone
Punch
Sealant
Masking Tape
File
Claw
Drill Hammer
Miter Saw or Hack Saw with
32-teeth Per Inch Blade
Level
2
Caulk Gun
Miter Box
Plus:
• Drop Cloth
• Petroleum Jelly
Sterling