Long-Term Storage - Komatsu PC210-10 Operation & Maintenance Manual

Hydraulic excavator
Table of Contents

Advertisement

ATTACHMENTS AND OPTIONS
OPERATION WHEN USING GENERAL ATTACHMENT 1 (E.G. CRUSHER)
When operating the attachment using rolling switch, lock the pedal with the lock pin to avoid accidental
operation.
General attachment 1 can be operated using either the rolling switch on the right lever or right attachment control
pedal.
1. Proportional Control Rolling Switch
With the working mode set to ATT/P or ATT/E mode, rolling
the switch up produces movement of the attachment, rolling
down produces opposite movement of the attachment.
Slight movement of the roller will give slight movement of the
attachment; full movement of the roller will give faster move-
ment of the attachment.
2. Attachment Control Pedal
With the working mode set to ATT mode, insert the lock pin
in FREE position (c) for both front and rear. Depress the
front or rear of the pedal to operate the attachment.
OPERATION WHEN USING ATTACHMENT 2 (E.G. CLAMSHELL ROTATION, CRUSHER ROTATION)
REMARK
If installing 2nd attachment line as a field kit, ask distributor to change monitor setting to allow 2 attachments.
The switch on left lever is a roller proportional control switch.
Rolling the switch up produces rotation in one direction, rolling
down produces rotation in the opposite direction. Slight move-
ment of the roller will give slight movement of the attachment;
full movement of the roller will give faster movement of the
attachment.
If the working mode pilot monitor does not display ATT/P or
ATT/E for the attachment mode, follow the instructions, see
"WHEN
USING
GENERAL
CRUSHER".

LONG-TERM STORAGE

Long-term storage:PC-L411-870K00A
If the equipment is not to be used for a long time, do as follows.
Set the stop valve in the LOCK condition.
q
Install the plugs to the valves.
q
Set the lock pin at the LOCK position.
q
If there is no breaker or general attachment installed, operating the pedal may cause overheating and other prob-
lems.
MACHINE READY FOR INSTALLATION OF ATTACHMENT
k
WARNING
ATTACHMENT
SUCH
AS
6–31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc210lc-10 demolition base spec.Pc210lc-10

Table of Contents