Control Panel; Installation; Operation - Perel EAC12S User Manual

• Control Panel

10. ON / OFF button
11. MODE button
12. FAN SPEED button
13. LCD
14. TEMPERATURE adjustment
15. TIMER button
16. WIND DIRECTION adjustment
• Remote Control
1. IR sensor
2. Cooling
3. Auto operation
4. Fan speed
5. Set time
6. LCD
7. MODE button
8. TEMPERATURE adjustment
9. TIMER button
10. Battery holder
11. Cover
12. Ventilation
13. Dehumidification
14. Signal transmission
15. Temperature
16. Wind direction
17. WIND swing button
18. Fan SPEED button
19. Power button

5. Installation

Please follow the instructions below to install the outside unit:
• Fix the metal mounting support onto the wall. Mind the length of
connection between the indoor and the outdoor unit. Make sure the
mounting support can hold 10 times the weight of the outdoor unit
(± 100kg).
• Fix the external unit to the mounting support.

6. Operation

a. Remote Control Battery Installation
• Open the battery compartment and insert 2 x AAA batteries (incl.). Mind the polarity. Do not mix old and
new batteries but replace all both batteries at the same time. Take out the batteries when the remote
control is not used for a long time.
• Close the battery cover.
EAC12S 5 PEREL