Indicator Light - BT Defender 100 User Manual

5655 BT Defender UG [2]

Indicator light

When first switched on:
Solid Red = The noise dose monitoring is not active.
To activate noise dose monitoring please refer to point 2 in
Setting up, page 5.
Flashing Red = fault, do not use. Call the Helpline.
During normal use
Flashing Green = secrecy on
Turning Green to Red = noise monitor. When the light is solid
red, it is recommended that the agent has an appropriate
break from taking calls.
4/2/04 10:55 am
BT Defender 100 – Edition 2 – 03.02.04 – 5655
Page 9
Using your BT Defender 100
This will start your noise dose
monitoring without the need to
connect to a computer or
alternatively visit the website
www.bt.com/defender for
instructions on how to download the
software and set the date and time.
If there is a power failure, the
BT Defender 100 will display a solid
RED. This is to inform the user that
noise dose monitoring needs to be
reactivated.
9