Table of Contents
Advertisement
IPLink
3.4.
Mounting Instructions
3.4.1. Antenna Assembly &
Connection
1. Assemble the antenna as required (mount-
ing instructions may change depending on the
type of antenna in use).
2. Install the antenna on top of your building
as shown in sections 3.4.2 and 3.4.3.
3. Connect the Ethernet cable (outdoor rated)
of the antenna to the PoE connector.
T
he Ethernet cable coming from the
antenna must be curved downwards
right before it is connected to the PoE
device to avoid dripping condensa-
tion and water into the PoE device.
Refer to chapter 4.3.3 on page 15 to
complete the connections.
8
IPLink, rev.01
3.4.2. Mounting a Short-Range
Antenna
Short-Range antennas are omnidirectional
antennas with a transmission range of 1 mile
(1.5 km). These antennas are provided with
the A-BOX wireless solution and they are
used to link up the buildings.
1. If needed, install a spacer on the cornice
to create a gap between the cornice and the
antenna (see example below).
2. Use the antenna bracket to fix the antenna
on the spacer and on the cornice.
Install the antenna upright.
Advertisement
Table of Contents
