Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sauber 1521
Summary of Contents for Sauber 1521
- Page 1 Operation and Maintenance Manual...
- Page 2 Valued Customer: Please review the following manual. If you have any ques- tions or need assistance of any kind, please contact your account representative toll free: Voice Communications......(800) 323-9147 Fax Communications......... (800) 833-3264 We welcome feedback on your manuals and our marketing communications.
- Page 3 Custom Engineered For National Grid Preface Thank you for choosing Sauber Mfg. Co.. You have purchased a trailer designed and built with care. With minimal maintenance and by understanding its operation, your new trailer will provide you with years of excellent service.
- Page 4 Make sure that the pintle hook is physically compatible with the trailer drawbar. Compat- ibility information is available from the pintle hook manufacturer. This information is the property of Sauber Mfg. Co. and is intended for customer use only.
- Page 5 Check the trailer brake lights by having someone operate the brake and turn signals on the tow vehicle while you visually verify it is functioning. If your trailer has electric brakes, your tow vehicle will have an electric This information is the property of Sauber Mfg. Co. and is intended for customer use only.
- Page 6 • Wheel Chocks Set the chocks at each rear wheel in the direction of the expected load or grade. This information is the property of Sauber Mfg. Co. and is intended for customer use only.
- Page 7 2250 PSI 17 RPM 2600 ft- lbs Model 1000-2S 2250 PSI High Speed 1300 ft- lbs High Speed High Torque 2600 ft-lbs High Torque This information is the property of Sauber Mfg. Co. and is intended for customer use only.
- Page 8 Reel Bar Holder Assy....Sauber......S3409-5 Capstan........Sauber......8102 w/8230 Coupler Power Source......Sauber ......Model 1010-H, Details to Follow Note: Most items listed here are in stock at Sauber Mfg. Co. This information is the property of Sauber Mfg. Co. and is intended for customer use only.
-
Page 9: Maintenance
Power Source Preface Thank you for choosing Sauber Mfg. Co. Your new generation Power Source represents the state of the art in mobile hydraulic power. We welcome your suggestions on its improvement and stand willing to assist you if any questions arise during its operation. With a very small amount of maintenance, and by understanding its oper- ation, your Hydraulic Power Source will provide you with years of good service. - Page 10 Therefore, once the hydraulic lines are connected, they will need to be removed only to run other hydraulic tools. Sauber Retriever valves include an internal relief, therefore your power source relief should be set to the maximum level while operating Sauber Retrievers. Disengage Retriever when tension- ing.
- Page 11 If engine performance is satisfactory, check the pump output. Hour Meter Your system is equipped with an hour meter. Use this meter to track service intervals shown in mainte- nance section. This information is the property of Sauber Mfg. Co. and is intended for customer use only.
- Page 12 -107IEDNX Filter Element......Gresen......-22001 Sight Gauge.......Lube Devices....Pressure Gauge......Headland......-1-P-5000E Back Pressure Gauge....Gresen......C112 Filler/Breather......Filtration Prod....BF12 Hydraulic Oil.......Citgo.......# 32 Anti-Wear Premium Motor Oil........Citgo.......10W-30W All Season This information is the property of Sauber Mfg. Co. and is intended for customer use only.
- Page 13 Replace Return Line Filter...............50 Hrs or at “Red” Gauge Reading Replace Suction Strainer.................300 Hrs Replace Fill Screen/Breather..............100 Hrs Change Hydraulic Oil & Filter..............100 Hrs Check Hydraulic Relief Setting........6 Months or 100 Hrs. This information is the property of Sauber Mfg. Co. and is intended for customer use only.
- Page 14 Rev. 5/2008 All Bronze Brake & Retriever Parts Page 1 Models 1602 & 1000 Item Description Reference Tensioning Brake Components 10335 Brake Assembly Complete - specify for XX Dia Bar - 136 lbs 10336 Set Linings - Small - 101282 (9.5" as measured around long side) 10337 Tensioning Adjustment Assembly (includes items 03/04/05/06/07) 10338...
- Page 15 Rev. 5/2008 All Bronze Brake & Retriever Parts Page 2 Models 1602 & 1000 Item Description Reference Reel Positioning Collar Components 1250 1250 Hinge Collar w/ 1602-31A Sleeve - 2225ST 10384 Collar Casting w/ Hook - NHC1A 10385 Collar Casting w/o Hook - NHC1 10386 Threaded Shaft - 2229ST 10253...
- Page 16 Rev. 5/2008 All Bronze Brake & Retriever Parts Page 3 Models 1602 & 1000 Factory Maintenance/Inspection recommended at approximately 2500 hours of use. Contact your account representative for details.
- Page 17 • Customer Labor Reimbursement @ $65/hour • A credit memo will be issued for claims under $400 and can be applied to a credit card For additional details about our warranties, contact your sales professional, and thank you for investing in Sauber Manufacturing equipment.
Need help?
Do you have a question about the 1521 and is the answer not in the manual?
Questions and answers