HoMedics HEALTH PLUS BPW-HP010 Manual page 12

1. With the cuff wrapped around your
wrist, press the START/STOP button.
Do not inflate the cuff unless it is
wrapped around your wrist. All digits
will light up, checking the display
functions. The checking procedure will
be completed after about 2 seconds.
START
STOP
21
2. After all symbols disappear, the display
will show a blinking "0". The monitor is
"Ready to Measure" and will
automatically inflate the cuff to begin
measurement. The cuff will then begin
deflating as measurement continues.
Note: The monitor will re-inflate
automatically if the system
detects that your body requires
more pressure for measurement.
22