Page 2
E-Key are automatically assigned the value of 1, the fingerscan receives the value of Thank you for deciding for a safe with the SECU Sicherheitsprodukte SELO-B , SELO-BF or SELO-BFE .
Page 3
(enter into the menu), please press the “Function” key, when the symbol automatically calibrated between two specific times. Exceptions www.secu-gmbh.de “M” is displayed. You can move within the menu using the keys “1” scroll up are a replacement of batteries and the switchover from summer to (symbol on display) and “2”...
Page 4
Attention: The message Please turn knob implies the action with the knob of • The Change code menu is displayed the locking unit, for which the opening code has been entered. www.secu-gmbh.de • By pressing the key 2 reach the Administrator menu • Press the On/Enter key 2.
Page 5
• The instruction Please turn knob is displayed too aslant! please repeat the sensor be read www.secu-gmbh.de In case following message is displayed: Value not achieved , an additional opening code shall be entered. (When the programming is made using the software only.
Page 6
1.5 Menu structure Made in Germany www.secu-gmbh.de SELO-B SELO-BF SELO-BFE...
Page 7
Made in Germany batteries, lift off the cover of the battery compartment with the tip of a screwdriver. Fit three leak-proof, type Mignon www.secu-gmbh.de LR6, AA, alkaline batteries, paying attention to the correct polarity. Dispose of the old batteries in accordance with...
Need help?
Do you have a question about the SELO-B 2 and is the answer not in the manual?
Questions and answers