DEVICE OVERVIEW & OPERATING INSTRUCTIONS
Controls & Connections.
CO2 Module to the petMAP+II and the patient's respiratory circuit.
3.
Insert an airway adapter into the
breathing circuit. Examples:
Note the below diagram for connecting the
2.
(optional)
1.
Locate the connector
labeled "CO2" on the side of
the petMAP+II, taking care
to avoid plugging the CO2
connector into the larger
ECG connector.
NOTE: If a REF# 9028 petMAP
cover is in use, lift the flap to
reveal the connector.
Attach the cable to the petMAP+II.
Listen for the soft "click" that indicates
full insertion.
Y
11