Cleaning With The Cleaning Brush - Silvercrest SLS 3 A1 Operating Instructions Manual

Cleaning with the cleaning brush

Shaving head/shaver unit
Clean the shaving head 3 under the shaver unit 2 with
the cleaning brush 9 .
1) Press the two release buttons 4 and pull the shaver
unit 2 upwards off the appliance .
2) Tap the shaver unit 2 on a flat surface and blow
off the hair cuttings . Use the cleaning brush 9 if
necessary . Blow loose hair from the shaving foils .
3) Use the cleaning brush 9 to clean the shaving
head 3 .
Trimmer
■ Clean the trimmer 1 after every use with the supplied
cleaning brush 9 .
■ Oil the trimmer 1 roughly every 6 months with a drop
of sewing machine oil:
■ Turn on the shaver for a short while to distribute the oil
on the blades .
Long-hair trimmer attachment
■ Rinse the long-hair trimmer attachment w under
running water .
Housing
■ Clean the housing with a moist cloth .
■ 10 │ GB │ CY
SLS 3 A1