Further Safety Instructions - Varytec Strobe Xenon 3000DMX Manual

1.2. Further safety instructions

IMPORTANT
Keep away from water and humidity!
Make sure to unplug the power supply before opening the housing!
Please read careful through this manual before the first start-up.
All persons which are entrusted with installation, start-up, operation, maintenance and repair of this
device have to:
•
Show a corresponding competence.
•
Follow the lines of this manual.
•
Face this manual as part of the product.
•
Keep this manual over the lifetime of the product.
•
Pass this manual to new owners of the device.
•
Download the latest version of the manual.
Safety-related red flags
IMPORTANT!
Handle carefully with dangerous electric voltages.
With this voltage there is the danger to get a life-threatening electric shock.
Always observe
After taken the device from a cold room to a warm room, it is not allowed to activate the device.
It is possible that thereby emerged condensed water damages the device. Do not Activate the device
until it reached ambient temperature.
Prevent that the power cable has contact with other cables. Handle carefully with power cables and
power connections. Don't touch them with clammy hands.
Make sure that the connected voltage does not exceed the specified values.
Make sure that it isn't possible to squeeze or damage the power cable with sharp edges. Assure
yourself with regular checks that there are no damages to the power cable or the device.
Don't switch the device in short time intervals (e.g. in second cycle) on and off.
Keep away children and laymen off the device.
Health risk!
Don't look directly into the light source. At certain circumstances it is
possible that some people get epileptic seizures. This is especially true for
individuals whose epilepsy was determined by a doctor. The device causes
(UV) radiation.
objects and operate it never without the protective glass on the front page!
By fast flashing, the risk of an epileptic seizure increases. Therefore do not
install it in danger zones (such as stairs, exit routes ...). Inform the visitors
before operating about the use of a strobe. Avoid longer flash sequences.
Therefore, keep a safe distance (at least 1.5m) to people and
4 / 16