1: Attaching The Table-Top Stand - Sony KDL-22EX420 Service Manual

GB01COV.book Page 7 Wednesday, December 15, 2010 1:22 PM
1: Attaching the Table-Top
Stand
1
Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
2
Place the TV set on the Table-Top Stand.
B KDL-55/46/40/32EX723,
KDL-55/46/40/32EX720,
KDL-46/40/32EX523, KDL-46/40/32EX520,
KDL-46/40/32CX523, KDL-46/40/32CX520
and KDL-32EX420 (except Australia model)
Guide
pins
B KDL-32EX420 (Australia model)
Guide
pins
~
• Align the TV from the top, slide it in until the guide
pins cannot be seen.
B KDL-26/22EX423 and KDL-26/22EX420
3
Fix the TV to the Table-Top Stand
according to the arrow marks
guide the screw holes using the supplied
screws.
B KDL-55/46/40/32EX723,
KDL-55/46/40/32EX720,
KDL-46/40/32EX523, KDL-46/40/32EX520,
KDL-46/40/32CX523, KDL-46/40/32CX520
and KDL-32EX420 (except Australia model)
B KDL-32EX420 (Australia model)
B KDL-26/22EX423 and KDL-26/22EX420
~
• If using an electric screwdriver, set the torque at
approximately 15 kgf·cm {1.5 N·m}.
Detaching the Table-Top Stand
from the TV
To detach the Table-Top Stand from the TV,
remove the screws
~
that
• Do not remove the Table-Top Stand for any reason
other than to install corresponding accessories on
the TV.
• When removing the Table-Top Stand from the TV,
lay the display face down on a stable work surface
that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the work
surface.
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
fixed in step 3.
7
GB
4-268-265-12(1)