Advertisement
• The following behaviour can lead to uninten-
tional faults:
- Fall arrester is twisted when placed onto the
rope guide and rubs on rope guide (braking)
- Upper body is leant too much backwards
(fall arrester blocks)
- Downward jerking (fall arrester blocks), fall
arrester can be released again by simply
lifting the karabiner
CAUTION:
Check that the unit has been attached correctly,
and that it is closed and locked.
Manual function test: jerk downwards!
• When positioning/working on the climbing
path:
• Also secure with a positioning rope and/or
energy absorbing belt. Do not work when only
secured via the fall arrester system!
• When crossing over: Before removing the fall
arrester SSE02 from the tension cable attach
the energy absorber belt to a secure attach-
ment point above the exit.
• Max. 3 persons in the securing system at the
same time (guide rope).
• Safety clearance 5.0 m between person
climbing at the same time.
DETACHMENT FROM THE SECURING SYSTEM
CAUTION:
Only detach yourself from the fall arrester, if
there is no longer a risk of falling. If necessary,
attach a lanyard for temporary securing.
Repeat steps C-D. Remove unit from the rope.
SSE 02 IN USE
EN
Advertisement
